Nominal voltage | |
---|---|
Specific value | 24 VDC |
Limit values, min/max | 11/27 VDC |
Nominal current, typically | |
Specific value | 120 mA |
Condition | unloaded |
Device design | |
Type | Single-/Multi-Turn |
Total resolution | <= 25 Bit |
Number of steps per revolution | <= 8192 |
Number of revolutions | <= 4096 |
CAN DeviceNet™ - Interface | |
CAN DeviceNet™ | EN 50325-2 |
Bus connection | ISO 11898-1, ISO 11898-2 |
CAN Specification 2.0 A | 11-Bit Identifier |
Transmission rate | |
Specific value | 125, 250, 500 kbit/s |
Adjustability | by means of DIP-switches |
Parameter/Function, changeable | Resolution |
Output code | |
Operating range | |
Error outputs | |
Preset parameter | |
Adjustment - Parameter | |
Safety range | |
Counting direction | |
Type of parametrization | programmable |
Programming - Tool | Fieldbus-Device |
Maximum Speed, mechanically | <= 6000 1/min |
Shaft load, axial/radial | <= 40 N, <= 60 N |
Bearing life time | >= 3.9E+10 revolutions |
Bearing life time - Parameter | |
Speed | 3000 1/min |
Operating temperature | 60 °C |
Shaft load, axial/radial | <= 20 N, <= 30 N |
Point of origin, shaft load | at the shaft end |
Shaft type | |
Shaft diameter [mm] | 6 |
Shaft diameter [mm] | 8 |
Shaft diameter [mm] | 10 |
Shaft diameter [mm] | 12 |
Shaft diameter [mm] | 14 |
Shaft diameter ["] | 3/8 |
Angular acceleration | <= 10E+4 rad/s² |
Moment of inertia, typically | 2.5E-6 kg m² |
Start-up torque, 20 °C | 2 Ncm |
Mass, typically | 0.7 kg |
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |